Set your Boost and forget it Boost is fully adjustable from under the bonnet Detent System for ease of adjustment Gated System to bring boost on faster Can be mounted with an optional mounting bracket  Mounting Bracket – BOOST TEE only Anodised billet aluminium Supplied with all mounting hardware p/n: FG-GBCV-BKT Why do you need a Gated Boost Control Valve (GBCV)? Increasing boost pressure is often the most cost effective increase in horsepower A Turbosmart GBCV will allow boost pressure to be adjusted above the standard setting To avoid using un-reliable methods of increasing Boost, such as shortening the actuator rod. This causes spring bind in the actuator and restricts flow through the wastegate. It avoids having to replace wastegate springs, which only give a fixed increase, which is not adjustable. Why choose a Turbosmart GBCV? All our GBCV’s feature the Gated System - unique to Turbosmart. This delays the pressure signal from entering the wastegate, which inturn spools up the turbo faster, resulting in more boost at lower RPM. Setting the desired boost pressure is made easy. Simply adjust the Boost Dial on the top of the unit, without the need for any tools. Turbosmart Boost controllers are capable of increasing boost pressure to the threshold of your turbo’s capacity All Turbosmart GBCV’s can be locked to prevent tampering All Turbosmart GBCV’s come with comprehensive installation instructions All Turbosmart GBCV’s carry a Life Time Warranty* WARNING! The incorrect use of Turbosmart products may result in damage to your vehicle. Failure to observe any notes or recommendations may result in incorrect use of the products. Turbosmart products are intended for use in off-road racing only. Turbosmart will accept no responsibility for the incorrect use of its products. Turbosmart will not be held responsible for any damage caused to property or person, directly or indirectly related to the use of any Turbosmart product.